Handling & Usage Of Hazardous Chemiclas SOP

 Handling & Usage Of Hazardous Chemiclas SOP

 

 

1.0  OBJECTIVE:

To have a control on careful handling & usage of hazardous chemicals to avoid any accident.

2.0  SCOPE:

This is applicable to chemicals lying in laboratory which are hazardous and dangerous while using and storage.

3.0  RESPONSIBILITY:

3.1  Doing: Technical Assistant.

3.2  Checking: Executive/ Manager.

4.0  ACCOUNTABILITY:

Head of the Q.C Department.

5.0  PROCEDURE:

5.1  The chemicals which are labeled as per following category & symbol are considered to be hazardous.

5.2  Handle the hazardous chemicals only using protective means like hand gloves, safety goggles.

5.3  Keep yourself away from container, while pouring out of siphoning the chemicals.

5.4  Use suction bulb or vacuum during pipetting of solution.

5.5  While preparing dilute sulphuric acid solution take special care as follow.

5.6  First cool the aqueous solution in ice bath. Slowly add sulphuric acid into the solution with constant stirring. Never follow reverse procedure.

5.7  Keep inflammable liquids and substances away from naked flame or electric spark.

5.8  Carefully handle the ether like chemicals and it should not be used near flame.

5.9  Clean the spillage if any as per SOP.

5.10       Handle the hazardous chemicals as per the MSDS file available in designated place of Q.C dept.

6.0  REVISION LOG:

Revision No.

Effective Date

Reason

00

01/07/2020

New SOP

 

7.0  REFERENCES:

7.1  Not Applicable.

8.0  ANNEXURES:

Annexure 1: Symbols.

Annexure: 1

Symbols



 

1.0  ABBREVIATIONS:

Abbreviation

Expanded Form

S

Standard operating procedure

&

And

%

percentage

 


Previous Post Next Post