Magnetic stirrer Calibration SOP

1.0  OBJECTIVE:
To lay down the calibration procedure of Magnetic stirrer to provide a system to calibrate, control and maintain the equipment used for inspection measuring and test equipment in order to ensure the correctness of measurement and test status.
2.0  SCOPE:
This shall be applicable to the Magnetic stirrer of Quality Control Instrument Laboratory.
3.0  RESPONSIBILITY:
3.1  Technical Assistant/ Helper.
3.2  Q.C Analyst.
4.0  ACCOUNTABILITY:
4.1  Manager-Quality Control.
5.0  MATERIAL AND EQUIPMENT:
5.1  Magnetic stirrer.
6.0  PROCEDURE:
6.1  Firstly clean the Magnetic stirrer, according to SOP.
6.2  Operate the Magnetic stirrer, according to SOP.
6.3  No calibration of magnetic stirrer.
7.0  REVISION LOG:
Revision No.
Effective Date
Reason
00

New SOP

8.0  REFERENCES:
8.1  Not Applicable.
9.0  ANNEXURES:
9.1  Not Applicable.



10.0    ABBREVIATIONS:
Abbreviation
Expanded Form
SOP
Standard operating procedure
&
And
No.
Number  
Ltd.
Limited
Q.C
Quality control
Q.A
Quality assurance
QCEB
Quality control equipment calibration
F
Format
oC
Degree centigrade


2 comments:

  1. The information you have published here is really awesome, as it contains some great knowledge which is very essential for me. Thanks for posting it. Torque Tester Amazon

    ReplyDelete
  2. In this post, you've shared such great knowledge. I might wish to thank you for sharing such an informative post. Keep Posting. testing and tagging adelaide

    ReplyDelete