1.0 OBJECTIVE:
To
lay down the operation procedure for Electric heater.
2.0 SCOPE:
This
SOP shall be applicable for the operation of Electric heater for heating purpose in Production department.
3.0 RESPONSIBILITY:
3.1
Supervisor/
Machine Operator.
3.2 Production Pharmacist.
4.0
ACCOUNTABILITY:
4.1 Manager-Production
department.
5.0
MATERIAL AND EQUIPMENT:
5.1 Electric heater.
6.0
PROCEDURE:
6.1
Before use makes sure that the electric
heater is clean according to SOP.
6.2
Put electric heater on the floor or on
firm place.
6.3
Put S.S Container and add material
which is needed to be heated.
6.4
Put power plug in main switch.
6.5
Switch ON the mains.
6.6
Switch ON the electric heater power
button.
6.7
Heat the material as per need.
6.8
Switch OFF the power button when not in use.
6.9
Switch OFF the power supply when not in use.
6.10
Precautions:
6.10.1
Carefully use electric heater.
7.0 REVISION LOG:
Revision No.
|
Effective Date
|
Reason
|
00
|
|
New
SOP
|
8.0 REFERENCES:
8.1
Not Applicable.
9.0 ANNEXURES:
9.1
Not Applicable.
10.0
ABBREVIATIONS:
Abbreviation
|
Expanded Form
|
SOP
|
Standard operating
procedure
|
&
|
And
|
No.
|
Number
|
Ltd.
|
Limited
|
PM
|
Production machinery
|
PMO
|
Production machinery
operation
|
F
|
Format
|
I discovered your site website online and appearance a couple of your early posts. Always keep on the excellent operate. I simply extra up your RSS feed to my MSN News Reader. Looking for forward to reading far more by you at a later date!… ptc heater element
ReplyDelete