Potassium iodide solution Reagent Preparation SOP


Title: Standard operating procedure of Potassium iodide solution.
1.0  OBJECTIVE:
To lay down the procedure of Potassium iodide solution for Laboratory use.
2.0  SCOPE:
This shall be applicable to the Quality Control Laboratory.
3.0  RESPONSIBILITY:
3.1  Q.C Pharmacist.
4.0  ACCOUNTABILITY:
4.1  Manager-Quality Control.
4.2  Head of the Q.C Department.
5.0  MATERIAL AND EQUIPMENT:
5.1  Glassware (one 1000.0ml beaker, one stirrer, one pipette).
5.2  Magnetic stirrer.
5.3  166.0g of potassium iodide.
5.4  Purified water q.s.
6.0  PROCEDURE:
6.1  Accurately weigh 166.0g of potassium iodide, by using weighing balance.
6.2  Take a beaker of 1000.0ml.
6.3  Add 166.0g of potassium iodide in it.  
6.4  Add sufficient quantity of purified water, by using magnetic stirrer.
6.5  And make up the final volume up to 1000.0ml with purified water.
7.0  REVISION LOG:
Revision No.
Effective Date
Reason
00

New SOP

8.0  REFERENCES:
8.1  The British Pharmacopoeia. Vol V. Appendix I, Official Monograph /General Reagent: 2015, pp.19-141.
9.0  ANNEXURES:
9.1  Not Applicable.
10.0    ABBREVIATIONS:
Abbreviation
Expanded Form
SOP
Standard operating procedure
&
And
No.
Number  
Ltd.
Limited
Q.C
Quality control
QCR
Quality control reagent
ml
Milliliter
g
Grams
R
Reagent
q.s.
Quantity sufficient
Vol
Volume


No comments:

Post a Comment