Ferric Ammonium Sulphate Solution R2 Reagent Preparation SOP


Title: Standard operating procedure of Ferric Ammonium Sulphate Solution R2.

1.0  OBJECTIVE:

To lay down the procedure of Ferric Ammonium Sulphate Solution R2 for Laboratory use.
2.0  SCOPE:
This shall be applicable to the Quality Control Laboratory.
3.0  RESPONSIBILITY:
3.1  Q.C Pharmacist.
4.0  ACCOUNTABILITY:
4.1  Manager-Quality Control.
4.2  Head of the Q.C Department.
5.0  MATERIAL AND EQUIPMENT:
5.1  Glassware (one 1000.0ml beaker, one stirrer, one pipette).
5.2  Analytical weighing balance.
5.3  100.0g of Ferric Ammonium Sulphate Solution R2.
5.4  Purified water (q.s).
6.0  PROCEDURE:
6.1  Take a beaker of 1000.0ml.
6.2  Weigh 100.0g of Ferric Ammonium Sulphate Solution R2; operate analytical weighing balance according to SOP.
6.3  Dilute 100.0g of Ferric Ammonium Sulphate Solution R2 in purified water. And mix it properly with the help of stirrer.
6.4  And make up the final volume up to 1000.0ml with purified water.
6.5  If necessary filter before use.
7.0  REVISION LOG:
Revision No.
Effective Date
Reason
00

New SOP

8.0  REFERENCES:
8.1  The British Pharmacopoeia. Vol V. Appendix I, Official Monograph /General Reagent: 2015, pp.19-141.
9.0  ANNEXURES:
9.1  Not Applicable.
10.0    ABBREVIATIONS:
Abbreviation
Expanded Form
SOP
Standard operating procedure
&
And
No.
Number  
Ltd.
Limited
Q.C
Quality control
QCR
Quality control reagent
ml
Milliliter
g
Grams
Vol
Volume
q.s
Quantity sufficient


No comments:

Post a Comment