Disodium Hydrogen Phosphate Reagent Preparation SOP

Title: Standard operating procedure of Disodium Hydrogen Phosphate Solution.


1.0  OBJECTIVE:
To lay down the procedure of Disodium Hydrogen Phosphate Solution reagent for Laboratory use.
2.0  SCOPE:
This shall be applicable to the Quality Control Laboratory.
3.0  RESPONSIBILITY:
3.1  Q.C Pharmacist.
4.0  ACCOUNTABILITY:
4.1  Manager-Quality Control.
4.2  Head of the Q.C Department.
5.0  MATERIAL AND EQUIPMENT:
5.1  Glassware (one 1000.0ml beaker, one stirrer, one 10.0ml pipette).
5.2  Analytical weighing balance.
5.3  90.0g of Disodium Hydrogen Phosphate.
5.4  Purified water (q.s).
6.0  PROCEDURE:
6.1  Take a beaker of 1000.0ml.
6.2  Weigh 90.0g of Disodium Hydrogen Phosphate; operate analytical weighing balance according to SOP.
6.3  Dilute 90.0g of Disodium Hydrogen Phosphate in purified water. And mix it properly with the help of stirrer.
6.4  And make up the final volume up to 1000.0ml with purified water.
7.0  REVISION LOG:
Revision No.
Effective Date
Reason
00

New SOP

8.0  REFERENCES:
8.1  The British Pharmacopoeia. Vol V. Appendix I, Official Monograph /General Reagent: 2015, pp.19-141.
9.0  ANNEXURES:
9.1  Not Applicable.
10.0    ABBREVIATIONS:
Abbreviation
Expanded Form
SOP
Standard operating procedure
&
And
No.
Number  
Ltd.
Limited
Q.C
Quality control
QCR
Quality control reagent
ml
Milliliter
g
Grams
Vol
Volume


No comments:

Post a Comment