Cool Incubator Cleaning SOP

1.0  OBJECTIVE:

To lay down the procedure for cleaning of Cool Incubator.

2.0  SCOPE:

This shall be applicable to the Cool Incubator of Quality Control Instrument Lab.

3.0  RESPONSIBILITY:

3.1  Technical Assistant/ Helper.

3.2  Q.C Analyst.

4.0  ACCOUNTABILITY:

4.1  Manager-Quality Control.

5.0  MATERIAL AND EQUIPMENT:

5.1  Cold Incubator.

5.2  Dry lint free cloth (2 pieces).

5.3  Purified water.

6.0  PROCEDURE:

6.1  Put “OFF” the main switch.

6.2  Remove all the materials from the Cool Incubator and carefully store them in air condition room.

6.3  Mop the inner and outer surface of the Cool Incubator with clean and dry duster.

6.4  If there is need to mop with the soap and water, clean it carefully and dry with clean dry cloth.

6.5  Frequency:

6.5.1        Cleaning is to be done once in a week.

6.6  Affix the “CLEANED” label and fill the “Cleaning Equipment Log Book”.

7.0  REVISION LOG:

Revision No.	Effective Date	Reason
00		New SOP

8.0  REFERENCES:

8.1  Not Applicable.

9.0  ANNEXURES:

Annexure 1: Cleaning record of Cool Incubator (Cleaning Equipment Log Book).

Annexure: 1

(Cleaning Equipment Log Book)

Cleaning record of Cool Incubator

CLEANING RECORD OF COOL INCUBATOR Date Inner surfaces Outer surfaces Cleaned by Checked by

10.0    ABBREVIATIONS:

Abbreviation	Expanded Form
SOP	Standard operating procedure
&	And
No.	Number
Ltd.	Limited
QCEC	Quality control Equipment cleaning
Q.C	Quality control