Calcium Hydroxide solution Reagent Preparation SOP

Title: Standard operating procedure of Calcium Hydroxide solution preparation for laboratory use.

1.0  OBJECTIVE:
To lay down the procedure of Calcium hydroxide solution for Laboratory use.
2.0  SCOPE:
This shall be applicable to the Quality Control Laboratory.
3.0  RESPONSIBILITY:
3.1  Q.C Analyst.
4.0  ACCOUNTABILITY:
4.1  Manager-Quality Control.
4.2  Head of the Q.C Department.
5.0  MATERIAL AND EQUIPMENT:
5.1  Glassware (100.0ml beaker, 1 spatula).
5.2  Analytical weighing balance.
5.3  Magnetic stirrer.
5.4  Calcium hydroxide (q.s).
5.5  Purified water (q.s).
6.0  PROCEDURE:
6.1  Take a beaker of 100.0ml of purified water and add calcium hydroxide small quantity. Dissolve it completely by using magnetic stirrer.
6.2  Add more amount of calcium hydroxide and dissolve, until freshly saturated solution is prepared.
7.0  REVISION LOG:
Revision No.
Effective Date
Reason
00

New SOP
8.0  REFERENCES:
8.1  The European Pharmacopoeia. Vol-1. Official Monograph /Reagents: 2015, pp.425-536.
9.0  ANNEXURES:
9.1  Not Applicable.
10.0    ABBREVIATIONS:
Abbreviation
Expanded Form
SOP
Standard operating procedure
No.
Number  
Ltd.
Limited
QCR
Quality control reagent
Q.C
Quality control
ml
Milliliter
q.s
Quantity sufficient
Vol
Volume


No comments:

Post a Comment