Ammonium molybdate Reagent Preparation SOP

Title: Standard operating procedure of Ammonium molybdate solution for laboratory use.

1.0  OBJECTIVE:
To lay down the procedure of Ammonium molybdate solution for Laboratory use.
2.0  SCOPE:
This shall be applicable to the Quality Control Laboratory.
3.0  RESPONSIBILITY:
3.1  Q.C Analyst.
4.0  ACCOUNTABILITY:
4.1  Manager-Quality Control.
4.2  Head of the Q.C Department.
5.0  MATERIAL AND EQUIPMENT:
5.1  Glassware (one 1000.0ml beaker, one stirrer).
5.2  Analytical weighing balance.
5.3  100.0g of ammonium molybdate.
5.4  Purified water (q.s).
6.0  PROCEDURE:
6.1  Take a beaker of 1000.0ml.
6.2  Weigh 100.0g of ammonium molybdate, operate analytical weighing balance according to SOP.
6.3  Dilute 100.0g of ammonium molybdate in sufficient water. And mix it by stirrer.
6.4  And make up the final volume up to 1000.0ml with water.
7.0  REVISION LOG:
Revision No.
Effective Date
Reason
00

New SOP

8.0  REFERENCES:
8.1  The European Pharmacopoeia. Vol-1. Official Monograph /Reagents: 2015, pp.425-536.
9.0  ANNEXURES:
9.1  Not Applicable.
10.0    ABBREVIATIONS:
Abbreviation
Expanded Form
SOP
Standard operating procedure
&
And
No.
Number  
Ltd.
Limited
Q.C
Quality control
ml
Milliliter
g
Grams
q.s
Quantity sufficient

No comments:

Post a Comment