Vernier caliper Cleaning SOP



1.0  OBJECTIVE:
To lay down the procedure for cleaning of Vernier caliper.
2.0  SCOPE:
This shall be applicable to the Vernier caliper of Quality Control Instrument Laboratory.
3.0  RESPONSIBILITY:
3.1  Technical Assistant/ Helper.
3.2  Q.C Analyst.
4.0  ACCOUNTABILITY:
4.1  Manager-Quality Control.
5.0  MATERIAL AND EQUIPMENT:
5.1  Vernier caliper.
5.2  Clean dry cloth
6.0  PROCEDURE:
6.1  Clean the vernier caliper with dry clean cloth before and after use.
6.2  Clean measuring jaws holding disks with a slightly wet cloth and then a dry cotton cloth.
6.3  Clean measuring jaws holding disks with a dry cotton cloth whenever required during and after the test.
6.4  Care has to be taken to remove the foreign particles from measuring faces.
6.5  Always keep the caliper in the case provided.
6.6  Affix the “CLEANED” label and fill the “Cleaning Equipment Log Book”.
7.0  REVISION LOG:
Revision No.
Effective Date
Reason
00

New SOP

8.0  REFERENCES:
8.1  Not Applicable.
9.0  ANNEXURES:
Annexure 1: Cleaning record of Vernier caliper (Cleaning Equipment Log Book).
Annexure: 1
(Cleaning Equipment Log Book)
Cleaning record of Vernier caliper
CLEANING RECORD OF VERNIER CALIPER
Date
Cleaned by
Checked by
Remarks 





















































































10.0    ABBREVIATIONS:
Abbreviation
Expanded Form
SOP
Standard operating procedure
&
And
No.
Number  
Ltd.
Limited
Q.C
Quality control
QCEC
Quality control equipment cleaning
F
Format


No comments:

Post a Comment