Melting point Apparatus Cleaning SOP



1.0  OBJECTIVE:
To lay down the procedure for cleaning of Melting point apparatus.
2.0  SCOPE:
This shall be applicable to the Melting point Apparatus of Quality Control Instrument Lab.
3.0  RESPONSIBILITY:
3.1  Technical Assistant/ Helper.
3.2  Q.C Analyst.
4.0  ACCOUNTABILITY:
4.1  Manager-Quality Control.
5.0  MATERIAL AND EQUIPMENT:
5.1  Melting point Apparatus.
5.2  Clean cloth.
6.0  PROCEDURE:
6.1  After completion switch “OFF” the instrument.
6.2  Switch “OFF” the main power supply.
6.3  Discard the used capillaries.
6.4  Once in a week remove adhered dust by wet mopping using detergent solution. Afterwards wipe the surface with a clean dry cloth to remove traces of detergent.
6.5  De-dust the instrument daily with dry cloth.
6.6  After completion affix the “CLEANED” label and fill the “Cleaning Equipment Log Book”.
6.7  Precautions:
6.7.1        Precaution has to be taken to clean the instrument immediately with dry cloth to remove the moisture.
7.0  REVISION LOG:
Revision No.
Effective Date
Reason
00

New SOP
8.0  REFERENCES:
8.1  Not Applicable.
9.0  ANNEXURES:
Annexure 1: Cleaning record of Melting point Apparatus.
























Annexure: 1
Cleaning record of Melting point Apparatus
CLEANING RECORD OF MELTING POINT APPARATUS
Date
Cleaned by
Checked by
Remarks 


























































































10.0    ABBREVIATIONS:
Abbreviation
Expanded Form
SOP
Standard operating procedure
&
And
No.
Number  
Ltd.
Limited
QCEC
Quality control equipment cleaning
Q.C
Quality control
F
Format


No comments:

Post a Comment