Cool Incubator Operational SOP



1.0  OBJECTIVE:
To lay down the operating procedure of Cold Incubator.
2.0  SCOPE:
This shall be applicable to the Cold Incubator of Quality Control Instrument Laboratory.
3.0  RESPONSIBILITY:
3.1  Technical Assistant/ Helper.
3.2  Q.C Analyst.
4.0  ACCOUNTABILITY:
4.1  Manager-Quality Control.
5.0  MATERIAL AND EQUIPMENT:
5.1  Cold Incubator.
6.0  PROCEDURE:
6.1  Operating procedure:
6.1.1        Ensure that the instrument is clean. Follow the SOP.
6.1.2        Put the power plug in the socket and switch it “ON”.
6.1.3        Confirm the “ON” position of apparatus by red light indication after switching on the apparatus.
6.1.4        Press set to enter setting mode.
6.1.5        Adjust temperature by pressing plus or minus key according to requirement.
6.1.6        After setting temperature press set key and leave the incubator to attain required temperature.
6.1.7        After attaining required temperature use the cold incubator for incubation the media.
6.2  Shut down:
6.2.1        Remain the incubator in operational position but when shut down occur consider the following points.
6.2.1.1  Switch off at the incubator and from the main supply.
6.2.1.2  Clean well internally and externally.
6.2.1.3  Close the door.
6.3  Precautions:
6.3.1        Avoid direct contact with surface during operation.
6.3.2        Door of incubator should be tightly closed.
7.0  REVISION LOG:
Revision No.
Effective Date
Reason
00

New SOP
8.0  REFERENCES:
8.1  Not Applicable.
9.0  ANNEXURES:
9.1  Not Applicable.
10.0    ABBREVIATIONS:
Abbreviation
Expanded Form
SOP
Standard operating procedure
&
And
No.
Number  
Ltd.
Limited
Q.C
Quality control
QCEO
Quality control equipment operation
QCEC
Quality control equipment cleaning
F
Format


No comments:

Post a Comment