Tapped density tester Cleaning SOP



1.0  OBJECTIVE:
To lay down the procedure for cleaning of tapped density tester.
2.0  SCOPE:
This shall be applicable to the tapped density tester of Quality Control Instrument Laboratory.
3.0  RESPONSIBILITY:
3.1  Technical Assistant/ Helper.
3.2  Q.C Analyst.
4.0  ACCOUNTABILITY:
4.1  Manager-Quality Control.
5.0  MATERIAL AND EQUIPMENT:
5.1  Tapped density tester
5.2  Tap water.
6.0  PROCEDURE:
6.1  Switch OFF the main power and instrument ON/OFF button OFF.
6.2  Remove the powder or granules (sample) from the cylinders, take the waste out.
6.3  Wash the cylinders with water, and make sure they are completely free of powder.
6.4  Set the wet cylinders by the sink to dry.
6.5  Clean the cylinders with tissue paper.
6.6  Clean the apparatus with cotton cloth.
6.7  Affix the “CLEANED” label and fill the “Cleaning Equipment Log Book”.
6.8  Frequency:
6.8.1        Clean regularly after every use.
7.0  REVISION LOG:
Revision No.
Effective Date
Reason
00

New SOP


8.0  REFERENCES:
8.1  Not Applicable.
9.0  ANNEXURES:
Annexure 1: Cleaning record of tapped density tester (Cleaning Equipment Log Book).
Annexure: 1
(Cleaning Equipment Log Book)
Cleaning record of tapped density tester
CLEANING RECORD OF TAPPED DENSITY TESTER
Date
Cleaned by
Checked by
Remarks 





















































































10.0    ABBREVIATIONS:
Abbreviation
Expanded Form
SOP
Standard operating procedure
&
And
No.
Number  
Ltd.
Limited
Q.C
Quality control
QCEC
Quality control equipment cleaning
F
Format


No comments:

Post a Comment